HID BI-Xenon Light Technical Parameter:

1. Input Voltage to detect:

High input voltage 23±0.5V or low input voltage 6.5V±0.5V will be protected, if the voltage is back to normal?8V±0.3V, the stabilizer can be restart.

2. Input Starting Current: ?8A±0.5A (Input 12V);

3. Stable Current: 3.2A±0.15A   (Input 12V);

4. From the start to the stabilization time: ?40S (Input 8A-4A);

5. Steady shot and waterproof: Accord with auto technology-related standard;

6. Output short circuit protection:

Time?2S,start ballast every 2S, test 10S and the ballast is normal;

7. Output short circuit protection:

Time?2S,start ballast every 2S, test 10S and the ballast is normal;

8. Continuous turning on and off the Xenon lamp:

Starting ballast just need 1s, and test 20s then the ballast is normal;

9. Continuous opening:

Don’t take the load to start ballast, test 10s (5 times), the ballast is normal;

10. Continuous short-circuit:

Do not take the load to start ballast every 1s, test 10s (5 times),and then the ballast is normal;

11. Continuous working:

Continuous with xenon lamp, after 7 days the ballast is normal;

12. Load-adaptive test:

Access all kinds of xenon lamp(including the brand, a variety of aging xenon lamp) the ballast works properly;

13. EMC/EMI: